ZyXEL Communications M-302 - Manual (Page 22)

M-302 User’s Guide
22 Chapter 1 Getting Started
1.2 M-302 Hardware and Utility Installation
Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make
hardware connections.
1.3 ZyXEL Utility Icon
After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the
system tray.
Figure 4 ZyXEL utility: System Tray Icon
Note: The ZyXEL utility system tray icon displays only when the M-302 is installed
properly.
When you use the ZyXEL utility, it automatically disables the Windows XP
wireless configuration tool.
The color of the ZyXEL utility system tray icon indicates the status of the M-302. Refer to the
following table for details.
1.4 Configuration Methods
To configure your M-302, use one of the following applications:
• Wireless Zero Configuration (WZC) (the Windows XP wireless configuration tool)
• ZyXEL Utility (This guide shows you how to configure the M-302 using the ZyXEL
utility)
• Odyssey Client Manager (not supplied)
Refer to the Odyssey Client Manager documentation for more information.
Note: Do NOT use WZC or the Odyssey Client Manager at the same time you use the
ZyXEL utility.
Table 3 ZyXEL Utility: System Tray Icon
COLOR DESCRIPTION
Red The M-302 is not connected to a wireless network or is searching for an available wireless
network.
Green The M-302 is connected to a wireless network.