Zanussi ZHC 935 - Manual (Page 10)

10
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical information
DIMENSIONS HEIGHT OF CANOPY: 73mm
HEIGHT OF CHIMNEY:(UPPER SECTION) 215mm
(LOWER SECTION) 740mm
WIDTH OF CANOPY: 898mm
DEPTH OF CANOPY: 500mm
WEIGHT: (GROSS) 24.00kg
WEIGHT: (NET) 19.40kg
ELECTRICAL SUPPLY VOLTAGE: (~50Hz) 230V
POWER CONSUMPTION: 240W
FAN MOTOR: 200W
LAMPS: (2 x20W Halogen) 40W
SUITABLE FOR -
INSTALLATION ABOVE:
ELECTRIC HOB: 7KW
(MAX)
GAS HOB: 10KW (MAX)
SLOT-IN ELECTRIC COOKER: 12.4KW (MAX)
SLOT-IN GAS COOKER: 13.5KW (MAX)
THIS APPLIANCE MUST BE EARTHED
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the voltage
on the rating plate inside the cooker hood.
Note: CE Marking certifies that this appliance complies with the
requirements laid down in EEC directive 89:336 (Electromagnetic
compatibility) and subsequent modifications and Low Votage directive
72/23/E.
This appliance is fitted with a 3 core mains cable
and must be permanently connected to the
electricity supply via a double-pole switch having
3mm minimum contact gap on each pole. A
Switched Fuse Connection Unit to BS.1363 Part
4, fitted with a 3 Amp fuse, is a recommended
mains supply connection accessory to ensure
compliance with the Safety Requirements
applicable to fixed wiring instructions.
This appliance conforms to BS.800:1988 and EEC
Directive No. 78 308 regarding suppression of
radio and television interference.