ZyXEL Communications 2002 Series - Manual (Page 60)

Prestige 2002 Series User’s Guide
60 Chapter 9 Logs
9.1.1 Log Message Descriptions
The following tables provide descriptions of example log messages.
Destination This field lists the destination IP address and the port number of the incoming
packet.
Note This field displays additional information about the log entry.
Table 16 View Log (continued)
LABEL DESCRIPTION
Table 17 System Error Logs
LOG MESSAGE DESCRIPTION
WAN connection is down.
A WAN connection is down. You cannot access the network
through this interface.
Table 18 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful
The device has adjusted its time based on information from
the time server.
Time calibration failed
The device failed to get information from the time server.
WAN interface gets IP: %s
A WAN interface got a new IP address from the DHCP,
PPPoE, PPTP or dial-up server.
DHCP client IP expired
A DHCP client's IP address has expired.
Successful WEB login
Someone has logged on to the device's web configurator
interface.
WEB login failed
Someone has failed to log on to the device's web configurator
interface.
Successful FTP login
Someone has logged on to the device via ftp.
FTP login failed
Someone has failed to log on to the device via ftp.
Time initialized by Daytime
Server
The device got the time and date from the Daytime server.
Time initialized by Time
server
The device got the time and date from the time server.
Time initialized by NTP
server
The device got the time and date from the NTP server.
Connect to Daytime server
fail
The device was not able to connect to the Daytime server.
Connect to Time server fail
The device was not able to connect to the Time server.
Connect to NTP server fail
The device was not able to connect to the NTP server.