Zanussi ZBM 878 - Manual (Page 6)

7
☞
How to set the Time of Day
The oven has a 24 hour clock.
When the oven is first connected to the electrical
supply, the display will automatically show 12:00.
If no button is pressed within 10 seconds, the
numbers will stop flashing and the clock will start
running from 12.00.
TO SET THE CORRECT TIME OF DAY :
If numbers are flashing:
press button or . When the correct
time is displayed, confirm the setting by
pressing button
. The clock will start
running.
If numbers are static:
press buttons and at the same time
and keep them pressed until the numbers
start flashing. Release buttons
and ,
then adjust the time by pressing buttons
or
and confirm by pressing button .
☞
"On/Off" Push Button
The oven must be switched on before setting any
cooking function or programme. When button
is
pressed, the pilot light above will come on, and the
oven light will switch on.
To switch off the oven, you can press button
at
any time. Any cooking function or programme will
stop, the oven light will switch off and the time
display will show the time of day only.
Oven Function Control Push Button
Push button allows you to select the ccoking
function. Each time you push this button, a pilot light
will come on in the Oven Function Display, showing
what cooking function has been chosen.
Increase and Decrease Push Buttons
Push buttons and allow you to increase or
decrease temperature or time settings.
i
When button is pressed, the display will
show the current internal temperature if the
oven has not completely cooled down.