Zanussi ZBM 878 - Manual (Page 24)

25
FO 0018
Oven Cavity
The enamelled base of the oven cavity is best cleaned
whilst the oven is still warm.
Wipe the oven over with a soft cloth soaked in warm
soapy water after each use. From time to time it will
be necessary to do a more thorough cleaning, using a
proprietary oven cleaner.
DO NOT attempt to clean catalytic liners
Oven Shelves and Shelf Supports
To clean the oven shelves and the shelf supports, soak
in warm soapy water and remove stubborn marks
with a well wetted soap impregnated pad. Rinse well
and dry with a soft cloth.
The shelf supports can be removed for easy cleaning
(see diagram). Please, ensure the retaining nuts are
secure when refitting the shelf support.
When cleaning the shelf supports, take care not
to remove the lubricating grease behind the
telescopic runners. This is meant to ensure
their good operation.
i
Grease Filter
To prevent a build-up of fats on the fan impellor, the
grease filter must be fitted by clipping it over the
vents in the back panel.
To clean the grease filter
When the oven has cooled down, remove the filter by
pushing the protruding tongue on the filter upward,
and wash carefully.
The grease filter should be cleaned after every use.
The filter may be washed in a dishwasher on a 65
°
C
wash. If the filter is heavily soiled, place the filter in a
saucepan of water with approximately 1 teaspoon of
automatic washing powder or dishwasher powder.
Bring to the boil and leave to soak for approximately
30 minutes or longer depending on the degree of
soiling. Ensure the solution does not boil over as it
could mark your hob.
Rinse filter in clear water and dry.
Remember to refit the filter before using the oven
again.
i