beautypg.com

Select the spin speed, Select the required programme, Start the machine – Zanussi FLS 1383 W User Manual

Page 8: At the end of the programme

background image

8

5. Select the spin speed

Turn the selector dial to the required position.

6. Select the required programme

Turn the programme selector dial clockwise to the
programme B or A (if you choose the EXTRA
PREWASH).

7. Start the machine

Before starting up the machine check that:

n

the appliance is plugged in

n

the water supply taps are turned on

n

the drain hose is correctly and securely positioned

n

the door and the detergent dispenser drawer are
closed.

Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.

8. At the end of the programme

The machine stops automatically.

If you have depressed the RINSE HOLD PLUS button,
the machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water and
spin, release the same button. To drain only, select
programme “P”.

The door is controlled by a safety device which releases
2 minutes after the end of the programme.

The door can only be opened when the door locked
light is off.

Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.

When the programme has finished you are advised to
unplug the appliance and turn off the water taps.

P0215

B

P0471