Zanussi FLS 1383 W - Manual (Page 10)

10
5. Select the spin speed
Turn the selector dial to the required position.
6. Select the required programme
Turn the programme selector dial clockwise to the
programme H.
7. Start the machine
Before starting up the machine check that:
n the appliance is plugged in
n the water supply taps are turned on
n the drain hose is correctly and securely positioned
n the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.
8. At the end of the programme
The machine stops automatically.
If you have depressed the RINSE HOLD PLUS button,
the machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water and
spin, release the same button. To drain only, select
programme “P”.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
The door can only be opened when the door locked
light is off.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
P0491
H
P0471