beautypg.com

Use of the refrigerator, Control panel, J. light on/off k. button on/off – Zanussi ZI 9454 X User Manual

Page 8: L - n. temperature setting buttons, M. temperature indicator, Q. dynamic air cooling light, R. dynamic air cooling button

background image

8

N

L

M

O

J K

P Q R

Control Panel

J

ON/OFF light

K

Fridge button ON/OFF

L

Temperature setting button (warmest)

M

Temperature indicator panel

J. Light ON/OFF

K. Button ON/OFF

ON:

Press the button (K). The pilot light (J)
switches on.

OFF: Keep the button (K) pressed until the pilot light

(J) and the temperature indicator switches off.

L - N. Temperature setting buttons

The temperature can be adjusted between +2°C and
+8°C.

By pressing the button (L or N), the current
temperature setting flashes in the indicator panel. It
is only possible to modify the setting temperature
only with the indicator flashing. To set a warmer
temperature, press button (L). To set a colder
temperature, press button (N). The indicator panel
displays the newly selected temperature for a few
seconds and then shows again the internal
compartment temperature.

The newly selected-temperature should be reached
after 24 hours.

Attention!

During the initial stabilising period the temperature
displayed cannot correspond to the requested
temperature. During this time it is possible that the
temperature displayed is lower than the actual
temperature.

M. Temperature indicator

During normal operation the indicator shows the
temperature inside the fridge.

Attention!

A difference between the temperature displayed and
temperature setting is normal. Especially when:
- a new setting has recently been selected

Use of the refrigerator

- the door has been left open for a long time
- warm food has been placed in the compartment

O. Super Cooling pilot light

P. Super Cooling button

The maximum performance is obtained by setting
the Super Cooling function. It’s recommended when
loading large quantities of food.

Press the Super Cooling button (P).The relevant pilot
light (O) illuminates.

The internal temperature goes down to +2°C.

After about 6 hours the Super Cooling function
switches off automatically.

Q. Dynamic Air Cooling light

The D.A.C. light is on by pushing the D.A.C. button.

R. Dynamic Air Cooling button

Push the D.A.C. button the light will illuminate.

N

Temperature setting button (coldest)

O

Super Cooling light

P

Super Cooling button

Q

Dynamic Air Cooling light

R

Dynamic Air Cooling button