Windsor Clipper CLP12IB - Manual (Page 14)

FILLING OPERATIONS
86038280 04/04/07
3-7ENG
FILLING THE CLIPPER
NOTE: Use clean bucket of water to fill solution tank
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry
spillage from top of solution tank before replacing
recovery tank.
CHEMICALS
Suitable Chemicals
Non-Compatible Chemicals
Alkalis Aldehydes
Detergents Aromatic Hydrocarbons
Hydroxides SP Butyls
Soaps Carbon Tetrachloride
Vinegar Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
* Product Trademark Names
STEP
1
STEP
2
STEP
3
STEP
4
RECOVERY TANK
SOLUTION
TANK
Remove solution
tank lid
Replace solution
tank lid
Add cleaning
chemical
12 – 24oz.
(356ml – 711ml)
FILL LINE 140°F (60°C)
12 gal.
(45.5 ltr.) or
Add water
RIGHT SIDE
OF UNIT
LEFT SIDE
OF UNIT