White Rodgers 1F97-51 - Manual (Page 31)

31
1. How can I permanently change a part of
my program?
Press VIEW
PRGM
and ADV
DAY until you reach the time/
temperature schedule you want. Then press
TIME
FWD or TIME
BACK
and or to change the
program. See PROGRAMMING YOUR
THERMOSTAT.
2. How can I have no change in tempera-
ture from one time period to another?
Simply select the same temperature for
each consecutive time period. For example,
you may select the same COOL A tempera-
ture for period 2 as you did for period 1,
which means the temperature will not change
from COOL A when period 2 begins. See
PROGRAMMING YOUR THERMOSTAT.
3. How can I finish my programming if the
display has already changed to time/
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat will
enter the HOLD mode and maintain a con-
stant temperature. The display will change
to the time/temperature mode. To resume
programming, press VIEW
PRGM
and ADV
DAY until you
return to the point where you stopped pro-
gramming. Then you may continue to pro-
gram the thermostat normally. If you want to
QUESTIONS AND ANSWERS