WhisperKool 2500 - Manual (Page 15)

Page 13
LIQUID MEASURING THERMOSTAT SYSTEM
The WhisperKOOL Slimline cooling unit comes equipped with a liquid temperature measuring thermostat system.
The probe contains a sensor chip which actually communicates back and
forth to the thermostat. This results in a consistent temperature setting and
accuracy. Do not remove the tip from the probe!
To Use the thermostat:
1. Locate an empty wine bottle.
2. Fill 3/4 full with room temperature tap water.
3. Place bottle probe securely into bottle.
4. Place bottle with probe level and to the side of the unit in your wine cellar.
Avoid pulling too much on the probe cord. It may become disconnected
resulting in non-operation of the unit.
Note: The thermostat can be set between 45°F and 67°F.
Remember: The WhisperKOOL System is based on the temperature of the
water. By measuring the liquid temperature rather than air, the unit will oper-
ate 75- 80% of the time.