WiebeTech SS8 - Manual (Page 30)

W i e b e T e c h L L C
Chapter 5 Advanced operations
5.1 Create volume group
To create the volume group, please follow these procedures:
Figure 5.1.1
1. Enter
Volume config
.
2. Enter
Volume group
.
3. Click .
4. Enter a VG Name, choose a RAID level from the pull down menu,
press to choose the PD slot(s) that will be members of this
VG, then press .
5. Check the setting. Press if all settings are correct.
6. Done. A summary page will be created to show the new VG.
Figure 5.1.2
(Figure 5.1.2: Setup of RAID 0 with 2 physical disks, named “VG-R0”. The total size is
306GB. Because no related UDV has been created yet, free size is still 306GB.
VG status is online.)
ProSATA SS8 User Manual
- 30 -