WiebeTech SS8 - Manual (Page 9)

W i e b e T e c h L L C
• Slide the disk tray back into the empty slot of the chassis and make sure
the handle clicks into place.
• Lock the tray with key provided to ensure disk security.
Key Lock
Power LED
Release
Access LED
Figure 2.3.1
2.4 Connect cables
Please see Figure 2.2.2 as reference for cable connections.
• Connect power cord.
• Connect SCSI Ultra 320 cable and SCSI Ultra 320 terminator. The
ProSATA SS8
controller does not have a terminator on board and will
need an external terminator to properly work.
• Connect console cable to the host server (RS-232).
• Connect LAN cable to your existing network setup (hub or switch), or
connect console cable (RS-232) to the host server.
ProSATA SS8 User Manual
- 9 -