Weider WESY13820 - Manual (Page 9)

9
14. Wrap the Arm Cable (36) around a “V”-Pulley
(38). Attach the Pulley and a Long Cable Trap
(40) to a Pulley Bracket (30) with an M10 x 55mm
Bolt (69) and an M10 Nylon Locknut (56). Be
sure the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
Attach the Pulley Bracket (30) to the bracket on
the Front Upright (4) with an M10 x 78mm Bolt
(71) and an M10 Nylon Locknut (56).
11. Wrap the High Cable (35) around a Pulley (39).
Attach the Pulley inside the bracket on the Top
Frame (5) with an M10 x 45mm Bolt (68) and an
M10 Nylon Locknut (56).
12. Attach the end of the High Cable (35) to the M10
x 20mm Bolt (75) in the bracket on the Weight
Carriage (26) with an M10 Nylon Locknut (56).
13. Locate the Arm Cable (36). Slide the Cable onto
the hook on the Right Arm (10).
68
35
5
39
56 11
26
75
56
35
12
10
Hook
36
13
4
30
56
69
56
71
36
40
14
38