Weider WESY13820 - Manual (Page 13)

13
28. Insert an M6 x 50mm Carriage Bolt (62) into the
center hole in the Seat Plate (24). Attach the Seat
Plate to the Seat (17) with two M6 x 16mm
Screws (59).
Attach the Seat (17) to the Seat Frame (6) with
the M6 x 50mm Carriage Bolt (62), an M6 x
50mm Screw (64), two M6 Washer (63), and an
M6 Nylon Locknut (58).
29. Rest the bracket on the Seat Frame (6) on the pin
on the Front Upright (4). Secure the Seat Frame
with an M8 x 67mm Carriage Bolt (66) and the
Seat Frame Knob (32).
27. Press two 38mm Square Inner Caps (48) into the
ends of the Seat Frame (6) and the Leg Lever (7).
Attach the Eyebolt (53) to the Leg Lever (7) with
an M10 Washer (55) and an M10 Nylon Locknut
(56).
Lubricate the M8 x 66mm Bolt (60). Attach the Leg
Lever (7) to the Seat Frame (6) with the Bolt and
an M8 Nylon Locknut (61).
6
53
48
61
55
56
48
7
60
Lubricate
27
59
63 64
58
62 6
17
24
28
Pin
6
66
32
4
29
SEAT ASSEMBLY
30. Attach the Backrest (16) to the Front Upright (4)
with two M6 x 63mm Screws (70) and two M6
Washers (63).
70
4 16
63
63
70
30