Wharfedale subwoofer WH-S8 & WH-S10 - Manual (Page 8)

USER INSTRUCTIONS: WH-S8 & WH-S10 SUBWOOFER
TROUBLESHOOTING
Before investigating a problem, always switch off the system at mains.
If your system is not working properly please work through this checklist before returning a unit to your dealer.
Symptom Possible Cause
System not switched on; Speaker cables shorting terminals out; Wrong source selected
Subwoofer not switched on
No Sound
Sound lacks bass content
Lack of bass reproduction
Subwoofer set to high; LFE level set too high; Subwoofer incorrectly wired
System level set too high; Bass control set too high; Subwoofer too close to room corners
System level set too high; Objects too close to subwoofer
System level set too high; Subwoofer level set too high; LFE level set too high
Subwoofer too close to TV. (Switch off system and TV, move units away, wait for 15 minutes,
switch on.)
Subwoofer phase incorrect; Subwoofer crossover control too low
Excessive bass distortion at low
volumes
Excessive or distorted bass at
high levels
Distorted / rattling sound at
high levels
Popping or thumping from
the subwoofer
Television picture colour is
distorted