Wolfgang Puck BIBC2020 - Manual (Page 5)

7 8
Suggested Uses
Your Immersion Blender comes with a fixed multi-purpose blade,
and an extra long shaft which allows the unit to be used in deep pots, or
tall containers.
Caution: Blades are sharp. Handle with care.
Functions Speed
Beat cream, whip egg whites,
puddings, sauces, frostings and
other airy, foamy mixtures. When
using, move Blending Rod up and
down to draw air in. Use a tall,
narrow container for best results
when foaming milk, making cream
and whipping egg whites.
Mix and stir shakes, drinks, omelet
batters, sauces and emulsions. Use
for pancake batter, gravies and
dressings.
Cut, chop, and crush raw or cooked
meat and hard vegetables.Grind
cooked meat for use in recipes such
as casseroles or chicken salad.
Chop, crush, and mash vegetables,
and fruit for baby food, soups and
sauces.
1 - 3
3 - 4
5
3 - 5
Assembly and Use
of Blending Rod or Wire Whisk
1 Ensure the Motor Base is unplugged.
Attach Blending Rod or Wire Whisk to
Motor Base by inserting Motor Base into
Blending Rod or Whisk and pressing
straight down until you hear a click. (see
figure 1)
2 Place food in suitable container for mixing.
You can use the beaker provided with this
unit or a suitable bowl, or stockpot. For
best results solid foods should be no larger
than 1/2" cubes.
3 Plug into 120-volt 60 Hz AC only outlet.
4 Immerse the Blending Rod or Whisk into
your ingredients. Turn the speed selector
to “1”, press the top Pulse Button to begin
blending; then gradually increase speed,
as needed. (see figure 2) Slowly move the
Rod up, down and sideways through the
food . Note: Never lift the Blending Rod
attachment out of your ingredients while
the unit is running to avoid splatter of
your food.
Note: At any time during the blending
process, you can press the Turbo Button
(bottom black button) to increase the
blender to its maximum speed. You cannot
adjust the speed using the Turbo Button.
Speed adjustment is accomplished only
when using the top Pulse Button.
6 Do not operate the motor continuously
for more than one minute when using
the Blending Rod or Wire Whisk, simply
pulse the selected speed to your
desired consistency.
7 When you are finished, simply release the
Pulse Button, unplug the Motor Base and
press the two release buttons on the Motor
Base to remove the selected attachment.
figure 1
figure 2
2020ImmBlderManual 2/19/10 4:28 PM Page 7