Western Digital My Book Studio Edition II - Manual (Page 12)

MY BOOK STUDIO II
USER MANUAL
SETTING UP – 9
8. Click Accept to accept the license agreement and continue with the installation.
9. Click Quit.
10. If you want to install the backup software now, double-click the WD Anywhere
Backup icon in the My Book Studio II screen and follow the instructions as
prompted.
11. Connect the adapter’s DC cable plug to the DC power input at the rear panel of
the product. Verify that plug type of your wall power adapter is the correct plug
type for your region.*
12. Connect the wall adapter to your AC power receptacle.
13. Plug one end of the interface cable (USB or FireWire 800) into an available port
on your computer.
14. Plug the other end of the interface cable into the device.
15. The unit will power up and mount to the system, and WD Drive Manager will
appear in the status menu. Your My Book Studio II is now installed and ready to
use.
*This product may ship with a different AC adapter configuration, depending on your region.
Note: For more information about interface types and connectors, search our knowledge base at http:/
/support.wdc.com for answer ID# 1729.
FireWire USB