White Rodgers 1F92W-51 - Manual (Page 40)

40
Set Current Time and Day
1. Press SET
CLOCK
once. The display will show min-
utes only.
EXAMPLE:
2. Press and hold either TIME
FWD
or TIME
BACK
until you
reach the correct minutes.
3. Press SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either TIME
FWD
or TIME
BACK
until you
reach the correct hour and AM/PM designation
(AM begins at midnight; PM begins at noon).
5. Press SET
DAY
once. The display will show the day
of the week as an abbreviation (MO for Monday,
TU for Tuesday, etc.).
6. Press and hold either TIME
FWD
or TIME
BACK
until you
reach the current day of the week.
7. Press RUN
PRGM
once. The display will show the
correct time and room temperature alternately.
Enter Heating Program
During programming, if you don’t press any buttons
for 5 minutes, the thermostat will enter the HOLD
mode and will maintain a constant temperature. The
display will revert to the alternating time/tempera-
ture display. To resume programming after this
happens, press VIEW
PRGM
until you are at the point
where you stopped programming. Then you may
continue to enter your programs normally. If you