White Rodgers 1F92W-51 - Manual (Page 37)

37
and cooling temperatures for consecutive time peri-
ods. You can choose start times, heating tempera-
tures, and cooling temperatures independently for
both weekday and weekend programs (for example,
you may select 5:00 AM and 70
°
as the weekday
MOR heating start time and temperature, and choose
7:00 AM and 76
°
as the weekday MOR cooling start
time and temperature). Use the table on the next
page to plan your program time periods, and the
temperatures you want during each period. You may
also want to look at the sample program table to get
an idea of how the thermostat can be programmed.
ENTERING YOUR PROGRAM
Follow these steps to enter the heating and cooling
programs you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for enter-
ing cooling programming). A fresh 9 volt Energizer
®
alkaline battery must be installed to perform off-wall
programming. BE SURE TO PRESS SYSTEM
HEAT-OFF-COOL-AUTO
TO
TURN THERMOSTAT OFF BEFORE REATTACH-
ING TO SUBBASE!
You cannot program the thermostat with the SYS-
TEM SWITCH in the AUTO position.
(Instructions continue on page 40).
NOTE