Introduction, Operation and set-up, Securing the base – Wilton 2221VS User Manual

Page 7

Introduction

This manual includes operating and maintenance
instructions for the Wilton Model 2221VS, 2223VS,
2232AC and 2234AC Variable Speed Drill Presses.
This manual also includes parts listings and illustra-
tions of replaceable parts.

Wilton Model 2221VS and 2223VS drill presses
feature manual speed control. Models 2232AC and
2234AC have inverter speed control. This manual
contains procedures for both speed control versions.
The manual provides separate instructions when
differences in operation and maintenance exist.

Refer to Figures 1 and 2 for key features of the drill
press.

Figure 1: Drill Press Features

(Manual Speed Control Model)

Figure 2: Drill Press Features

(Inverter Speed Control Model)

Operation and Set-up

Securing the Base

The base of the drill press has four mounting slots;
two slots on both sides of the base. The drill press
should be level and rest solidly on the floor. Place
shims under the four mounting slots in the base as
needed to level the drill press.

When securing the base to the floor, apply even
torque to the fasteners to prevent distortion of the
base.

Control
Panel

Speed
Adjustment
Handwheel

Depth
Indicator

Spindle

Electrical
Enclosure
(hidden, far
side)Drill

Head

Head
Clamping
Nuts (2)

Drive
Motor

Column

Spindle
Handle

Work
Table

Base

Mounting
Slots (4)

Drive

Motor

Control Panel