Windsor Walk Behind Scrubber 10052250 - Manual (Page 8)

TECHNICAL SPECIFICATIONS
CUTTER 24V 86039070 04/10/07 3-1
ITEM DIMENSION/CAPACITY
Nominal power
1450 W
Rated Voltage 24VDC
Rated Amperage 60 Amps
Batteries 4 X 6 Volt 250-305-335 AH @
20 hr rate
Scrub Brush Motors 2 X .75 hp (0.56 kW)
Vacuum Motor .75 hp (0.56 Kw)
Propelling Motor .3 hp (0.22 Kw)
Mass (GVW) 915 lbs. (415 kg) with 335 AH
Weight empty without batteries 346 lbs. (157 kg)
Solution Control Gravity feed, fully variable with
automatic shut-off in neutral
Solution tank capacity 23 gal. (87 l)
Recovery tank capacity 25 gal. (95 l)
Scrub brush diameter for 26 in. (66 cm) scrub head 13 in (33.0 cm)
Scrub brush pressure Mechanical 80 lbs. (356N)
Floating 130 lbs. (578N)
restricted
Scrub brush speed 200 rpm
Tires 2 x 10 in (25.4 cm) non-marking
foam-filled
Casters 2 X 4 in (10.2 cm) polyurethane
solid non-marking
Foundation Pressure 21 lbs./in 2 (140 kPa)
Maximum Speed 3.2 Miles/hour (5.2 km/hour)
Coverage with 26 in. (66 cm) scrub head 31,680 ft 2 /hour at 3.0 mph with
2 in. overlap*
Frame Construction Steel plate with epoxy
powdercoat finish.
Brakes (optional) Tire lock parking brake
Minimum aisle u-turn width with 26 in. (66 cm) scrub head 69 in. (175 cm)
Maximum rated climb and descent angle with empty tanks
and without optional parking brake 2%
Maximum rated climb and descent angle with full tanks
and without optional parking brake 2%
* Cleaning rate results will vary depending on floor type, building structure, etc.