Western Telematic CMS-16 - Manual (Page 5)

7.1.1.2. Disconnecting Ports ■
7.1.2. Defining Hunt Groups ■
7.2. Passive Mode ❍
7.3. Buffer Mode
7.3.1. Reading Data from Buffer Mode Ports ■
7.3.2. Port Buffers ■
❍
7.4. Modem Mode ❍
8. Saving and Restoring Configuration Parameters
8.1. Sending Parameters to a File ❍
8.2. Restoring Saved Parameters ❍
●
9. Upgrading CMS Firmware ●
10. Command Reference Guide
10.1. Command Conventions ❍
10.2. Command Response ❍
10.3. Command Summary ❍
10.4. Command Set ❍
●
Appendices
A. RS232 Port Interface ●
B. Specifications ●
C. Customer Service ●
List of Figures
2.1. Instrument Front Panel ●
2.2. Instrument Back Panel ●
3.1. The Supervisor Level Help Screen ●
3.2. The Port Status Screen (Defaults Shown) ●
4.1. Terminal Block Assembly (DC Units Only) ●
4.2. CMS Application Example (Not to Scale) ●
5.1. Port Configuration Menu (Port 2 Shown) ●
5.2. Port Parameters Menu (Modem Mode) ●
5.3. Network Parameters Menu (Supervisor Mode Only) ●