Record functions – Yamaha PSR-510 User Manual

Page 52

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

Record Functions

The following chart shows the step size and gate time settings required

to enter a variety of notes:

Example

STEP
FWD

PLAY/STOP

MULTI DISPLAY
(Beat/Clock)

MULTI DISPLAY
(Step Size)

MULTI DISPLAY
(Gate Time)

Note

Press
[PLAY/STOP]

STEP
FWD

PLAY/STOP

Hold

Twice

STEP
FWD

PLAY/STOP

Once

Three

times

Twice

STEP
FWD

PLAY/STOP

It’s also possible to specify the step sizes for all notes by specifying the

shortest required step size and then using the [STEP FWD] button to enter
all other note lengths.

• In the case shown to the left, press and hold , press

[STEP FWD] and then , and then release .

NOTES

Repeat .....................................................................................................................................................

Repeat steps 2, 3, and 4 until the required number of notes has been en-

tered.

NOTES

• Previously-recorded tracks can not be monitored during step record-

ing.

Stop Recording .......................................................................................................................................

Stop recording by pressing the track or MULTI PAD button being re-

corded. The [STEP REC] indicator will go out.

NOTES

• PSR-510 allows you to “punch-in” and “punch-out” at any measure to

step re-record Song Memory data. Step recording is carried out in 1-
measure units, so if you punch out in the middle of measure rests will
be recorded for the remainder of that measure.

• “---” may appear on the MULTI DISPLAY while the PSR-510 is

processing step-recorded data.