Wilton 4103 - Manual (Page 17)

17
Accessories
Belt Grinder Pedestal
The optional pedestal enables the Square Wheel Belt
Grinder to be mounted in a free standing configuration
rather than on a work bench. The grinder is secured
to the pedestal using the four holes in the base of the
grinder (refer to page 22).
Dust Collection Systems
A dust collection system is available as an option
(refer to page 24 for additional coverage).
The dust collection system can be used in two con-
figurations: as a machine base (Figure 9) or as a
stand- alone system (Figure 8).
In the stand-alone configuration, the dust collection
system is placed next to the grinding machine, and the
dust collection hose connected to the inlet duct. It
may also be placed between two grinding machines,
making use of the inlet ducts on both sides of the dust
collection system.
Another option is to use the dust collection system as
a base for the Model 4103 grinding machine in lieu of
placing the machine on a bench or on the pedestal.
The second inlet duct on the side of the system is
available for connecting another grinding machine. In
areas with limited space, this may be the most desir-
able option.
The dust collection system features a chip drawer into
which grinding debris is collected. The dust collection
system has a filter at the rear to filter out remaining
grinding debris.
The system has a removable top that provides access
for cleaning and maintenance. The system is con-
trolled by an ON/OFF toggle switch on the motor at the
rear of the machine.
Figure 8: Stand-Alone Dust Collection System
Figure 9: Dust Collection System -
Used as Grinder Base