Electrical system, Transmission, Specifications – Walker MT User Manual

Page 9

Specifications

MODEL

AIR COOLED
MT (20.0 HP)
MTEFI (26.0 HP)

LIQUID COOLED
MTL (25.0 HP)

ELECTRICAL SYSTEM

Battery

12 Volt, 35AH, 295 CCA

Charging System

Flywheel Alternator

Charging Output

15 Amp DC (Regulated)

25 Amp DC (Regulated)

System Polarity

Negative Ground

Ignition

Electronic Capacitive
Discharge

Starter

12 Volt Electric Ring-Gear
Type, Solenoid Shift

Interlock Switch

Ignition Lockout by Seat
Switch, Transmission Neutral
and Blade Clutch

Circuit Breaker

Manual Reset (30A)

TRANSMISSION

Manufacturer/Model

Dual Hydrostatic, Eaton
Model 7, Each Wheel
Independently Driven

Steering

Hand Lever Control /
Individual Wheel

Forward Speed Control

Precision Friction Lock Lever,
Cruise Control, with
Neutral-Park Position

Service Brake

Dynamic Braking through
Hydrostatic Transmission

Parking Brake

Mechanical Pin Lock in
Transmission Gear

Neutral

Transmission Release by
Manual Dump Valve

Final Drive

Gear Drive Axle

Transmission Fluid

Factory Service

Mobil 1 Synthetic Motor Oil
(15W50)

Alternate Transmission Fluid

SAE 30W Straight Viscosity
Motor Oil

Transmission Fluid Capacity

1 qt (1 liter)

Transmission Cooling

Cooling Fan Mounted on
Drive Pulley

Ground Travel Speed

Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)

0-5 (0-8) Infinitely Variable*
0-5 (0-8) Infinitely Variable

* 6.5 m.p.h. with Optional Speed-Up Kit

This manual is related to the following products:

MTL MTEFI MTLEFI