Walker MT - Manual (Page 32)

Assembly Instructions
30
CHECK MOWER BLADE CONDITION, SHARP-
NESS, AND SECURITY OF MOUNTING
The blade mounting nut should be tightened to
60 ft-lb (81.3 N
⋅
m). If blade sharpening is required,
refer to CHECKING/SERVICING for Sharpen
Mower Blades in
Maintenance Instructions .
ADJUST MOWER CUTTING HEIGHT, IF RE-
QUIRED
Position the hitch pins in the four deck support pins.
Refer to the “Cutting Height Adjustment” decal on
the deck gearbox cover.
PERFORM ANY ADDITIONAL PROCEDURES
called for on the MAINTENANCE SCHEDULE
CHART in
Maintenance Instructions .