Operation 13, Operation 12 – Whistler PRO-3450 User Manual
Page 8
OPERATION
13
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Real Voice
®
, Abbreviated
Power Up Sequence test and VG-2 Mode. When selecting
options, Dark (D)=yes, City (C)=no, Quiet (Q)=next selection.
Any one of these must be pressed within 20 seconds or
options mode will automatically be exited. To enter:
Press Q:
*Display
To Change, Option:
Reads:
Reads:
For 2 Seconds
TONE 3
D or C
Tone1, Tone 2
2nd time
TEST YES
D = YES
X, K, Ka Audio tones
C = NO
1 beep during
Power Up
3rd time
TEMP ˚F
D or C
Changes Temp
Reading
4th time
TEMP NO
D = YES
Temp ON
C = NO
Temp OFF
5th time
BATT NO
D = YES
Battery Voltage ON
C = NO
Battery Voltage OFF
6th time
POP ON
D = YES
Turns POP
™
Mode ON
C = NO
Turns POP
™
Mode OFF
7th time
SR OFF
D = ON
Turns Safety Radar ON
C = OFF
Tu rns Safety Radar OFF
8th time
X ON
D = ON
Turns X Band ON
C = OFF
Turns X Band OFF
9th time
K ON
D = ON
Turns K Band ON
C = OFF
Turns K Band OFF
OPERATION
12
Stay Alert™ Feature
The Stay Alert™ Feature is designed to test a driver’s
alertness. To engage (when unit is not alarming):
• Press and hold City for 2 seconds. Display reads:
Within 30-60 seconds two beeps are sounded; to show
a l e rtness, the driver must press either the Dark, City or Q u i e t
button within 3-5 seconds. If the button is pressed within 3-5
seconds, the cycle is re p e a t e d .
If a button was not pressed within 3-5 seconds alarm sounds
and the display re a d s :
• Press P/V to exit.
WA R N I N G ! ! ! Stay Alert™ is NOT intended as a substitute for
adequate rest. You should NOT operate a vehicle if you are
d ro w s y. During extended periods of vehicle operation, you
should take frequent breaks. Improper reliance on the Stay
A l e rt™ feature may result in vehicle damage, personal injury
or death. NEVER OPERATE A VEHICLE IF YOU ARE
D R O W S Y.
Integrated Real Voice
®
When selected and Optional Voice Module is connected,
Real Voice
®
will be used to articulate the following:
1. Band Identification
2. Safety Warning System™ messages
NOTE: In certain cases the voice message does not
replicate the text message.
3. Feature Selection
Pro-3450_OwnersManual.qxd 3/15/04 4:30 PM Page 15