Weider Pro 875 831.150680 - Manual (Page 9)

8. Press two 3/4” Round Inner Caps (29) into each
Pad Tube (19).
Slide two Pad Tubes (19) through the Leg Lever
(9). Slide the third Pad Tube through the holes in
the Front Leg (1).
Slide two Foam Pads (20) onto the ends of each
Pad Tube (19).
9
20
20
19
19
20
29
29
29
1
8
13
9
9
9. Attach the Curl Pad (13) to the Curl Post (12) with
two M6 x 16mm Screws (37).
10. Make sure that all parts are properly tightened
before you use the weight bench. The use of
all remaining parts will be explained in ADJUST-
MENTS, beginning on page 10.
37
37
12