Weider Pro 875 831.150680 - Manual (Page 7)

3
2
36
35
36
3
7
40
8
40
24
39
39
4
10
39
23
4. Press four 1” Square Inner Caps (23) into the
ends of the Right and Left Backrest Frames (7,
8). Press two 1” x 2” Inner Caps (24) into the
adjustment tubes on the Backrest Frames.
Orient the Backrest (10) as shown. Attach the
Backrest to the Right and Left Backrest Frames
(7, 8) with four M6 x 38mm Screws (39) and four
M6 Washers (40).
Do not tighten the Screws
yet.
3. Attach the Frame (2) to the Crossbar (3) with two
M10 x 81mm Bolts (35) and two M10 Nylon
Locknuts (36).
Do not tighten the Nylon
Locknuts yet.
40 23
7
2
16
22
47
22
22
1
36
2
36
2. Press three 45mm Square Inner Caps (22) into the
Front Leg (1).
Attach the Front Leg (1) to the Frame (2) with two
M10 x 65mm Bolts (47), a Support Plate (16), and
two M10 Nylon Locknuts (36).
Do not tighten the
Nylon Locknuts yet.