beautypg.com

Mower deck lnstallation on tractor, Deck installation, Quick coupler installation tool – Walker MC (20 HP) User Manual

Page 23: Mower deck installation (pto shaft connection), Assembly instructions

background image

Assembly Instructions

19

Tilt-Up Spring and Roller Wheel

Installation on Rear Discharge Deck

Mower Deck lnstallation on Tractor

Deck Installation

1. Lightly grease each deck support arm (2) on the

tractor. Refer to Mower Deck Installation pho-
to for location of deck support arm.

2. Engage the deck carrier frame tube sockets on

the tractor support arms (refer to Discharge
Chute and PTO Shaft Guard Installation
photo for socket location), slide the deck onto
the support arms approximately 3 in. (76 mm).

3. Retract spring-loaded coupler ring on the PTO

Tube (provided in Owner’s Packet) and insert
coupler tool. Refer to Quick Coupler Installa-
tion Tool
photo.

Quick Coupler Installation Tool

4.

Reaching under the tractor, join the PTO tube to
the PTO shaft (align arrow decals). Slide the
PTO tube onto the spline shaft on the tractor
PTO gearbox.

NOTE: When installing the DSD52 Mower
deck, make sure to retract the dolly wheel after
mounting the deck on the tractor.

Mower Deck Installation

(PTO Shaft Connection)

5.

Slide the deck the rest of the way on the deck
arms. If the deck is rear discharge (GHS
equipped model), the rear discharge chute will
need to be aligned and connected to the blower
inlet during the last 2 in. (51 mm) of slide action
on the support arms.

NOTE: Raising the mower body may be help-
ful in fitting and guiding the deck chute into the
blower.

6. Install the hitch pin through the hole on the end

of each support arm to lock the deck in place
(refer to Deck Counterweight Spring Installa-
tion
photo). Two (2) hitch pins are included in
the owner's packet of materials.

7. Remove Installation Tool from coupler ring and

make sure the ring has “snapped” securely on
the spline shaft.

IMPORTANT: DO NOT operate tractor with
Quick-Coupler Installation Tool installed.

Attach Spring

Roller Wheels

PTO Tube

Quick Coupler

Installation Tool

Pull Back Spring-Loaded

Coupler Ring

Arrows on Shaft and Tube

(used to align when sliding together)

PTO

Connection

Grease Deck

Support Arms