Walker MC (20 HP) - Manual (Page 10)

Specifications
6
MODEL MC
DRIVE BELTS
Engine PTO Walker P/N 8230
Jackshaft Drive Gates 3VX385 (or Walker P/N 6251-1)
Ground Drive, Micro-V Walker P/N 7248
Blower (GHS Model) Walker P/N 7234-1
GHS SYSTEM (Optional)
Blower 4-1/2 x 10-1/2 x 1/2 in. (11 x 27 x 1 cm) Three-Blade Paddle Wheel
(Driven by Mower Engine)
Blower Brake Band Brake (Works in Combination with PTO Clutch, Stops
Blower within Five (5) Seconds of PTO Disengagement)
Max. Blower Speed 3600 RPM
Grass Catcher Capacity* 89 Gallons (335 liters)/9.5 Bushels
Optional Grass Catcher Capacity 63 Gallons (238 liters)/6.7 Bushels
Full Signal Oscillating Vane Switch Mounted on Grass Delivery Spout Triggers
Horn Signal
Powerfil
®
Oscillating Delivery Spout Driven by 12 Volt Electric Gearmotor
Spreads Material throughout Interior of Catcher @ 25 Cycles/Minute
SEAT Contour-Molded, with Nylon Backed Vinyl Cover and Integral
Foam Cushion
FRAME/BODY CONSTRUCTION
Frame All Welded Unitized Steel Chassis
Body 14 Gauge Steel
Deck 11 Gauge Steel
GHS Catcher and Chutes Molded Cross-Linked Polyethylene (UV Stabilized)
*Optional (6.7 Bushel) Grass Catcher subtracts approx. 5 lb (2 kg) and 5 in. (13 cm) in Height
NOTE: The manufacturer reserves the right to make changes in specifications shown herein at any time
without notice or obligation.