Technical specifications – Windsor Walk Behind Scrubber 10052280 User Manual
Page 8

TECHNICAL SPECIFICATIONS
CUTTER 36V (SCE) 86037030 12/05/06
3-1
ITEM DIMENSION/CAPACITY
Nominal power
2160 W
Rated Voltage
36 Volt DC
Rated Amperage
60 amps
Batteries
6 x 6 volt 250-305-335 AH @ 20 Hr rate
Scrub Brush Motors
2 x .75 hp (.56 kW)
Vacuum Motor
3 Stage .75 hp (.56 kW)
Propelling Motor
.75 hp (.56 kW)
Mass (GVW)
1265 lb (574 kg) w/335 AH batteries
Weight empty without batteries
433 lb (196 kg)
Solution Control
Gravity feed, fully variable with automatic shut-
off in neutral
Solution tank capacity
32 gal (118 L)
Recovery tank capacity
35 gal (123 L)
Scrub brush diameter 32 in. (81 cm) scrub head
16 in (41 cm)
Scrub brush pressure
Mechanical, 80 lbs floating
130 lbs restricted (356n-578n)
Scrub brush speed
200 rpm
Tires
2 x 12 in (30.5 cm) Non-Mark Foam Fill
Casters
2 x 4 in (10.2 cm) polyurethane, Non-Mark
Foundation Pressure
64 lbs/in² (441 kPa)
Maximum Speed
3.2 miles/hour (5.2 kW/hour)
Coverage with 32 in. (81 cm) scrub head
36,250 ft²/hr @ 3.0 mph with 2 in overlap *
Frame Construction
Powder coated steel
Brakes (optional)
Tire lock parking
Minimum aisle u-turn width with 32 in. (81 cm) scrub head
69 inches (175 cm)
Maximum rated climb and descent angle with empty tanks and
without optional parking brake
2%
Maximum rated climb and descent angle with full tanks and
without optional parking brake
2%
*
Cleaning rate results will vary depending on floor type, building structure, etc.