Installation, Configuration menu, Select configuration options – White Rodgers BLUE EASY 1F86EZ-0251 User Manual
Page 5
5
Configuration Menu
Menu Screen
Number
Displayed
(Factory Default)
Press
or
to select options
01
(SS)
HP
Select Single Stage (SS) or
Heat Pump (HP) for a single compressor
02
Sleep
(OFF)
On
Select Sleep Timer On or OFF
If selected OFF, skip to menu screen 04
03
h
(8)
1 to 12
Select 1 to 12 hours for Sleep Timer On.
See Sleep Timer section on page 3
04
CS
(OFF)
On
Select Cool Savings Feature On or OFF
If selected OFF, skip to menu screen 06
05
CS
(3)
1 to 6
Select 1 to 6 for Cool Savings Feature On
See Cool Savings section on page 3
06
CR
(ME)
FA, SL
Select Adjustable Anticipation, cycle rate for Heat
See table below
07
CR
(ME)
FA, SL
Select Adjustable Anticipation, cycle rate for Cool
See table below
08
CL
(OFF)
On
Select Compressor Lockout OFF or On. When selected On,
the thermostat will wait 5 minutes before turning the
compressor on.
09
L
(On)
OFF
Select Display Light On of OFF. When selected On and the “C”
terminal is connected, the backlight will stay on continuously.
When OFF the backlight will come on for a short time when any
key is pressed.
10
Room Temp
(0)
4 LO to
4 HI
Select room temperature display for 4
o
higher or 4
o
lower than
the actual temperature
11
o
F
o
C
Select
o
F or
o
C Display (temperature displayed in Fahrenheit or
Celsius)
12
Change Filter
(OFF)
On
Select filter maintenance indicator OFF or On.
If selected OFF, item B will be skipped
13
Change Filter
(200 h)
25 to 1975
Select 25 to 1975 hours for Change Filter reminder
See Change Filter reminder section on page 3
Menu Navigation
Press
for next. Press
to go back
To exit the menu: Set the system switch to Cool or Heat. If
no keys are pressed within fifteen minutes, the thermostat will
revert to normal operation.
Installation
Select Configuration Options
The configuration menu allows you to set certain thermostat operating characteristics to your system or personal requirements.
Select Cycle Rate – The cycle rate can be adjusted to keep
the heat or cool on longer or shorter to match the temperature
response of the home with your heating and cooling system.
MODE
Fast
Medium
Slow
(FA)
(ME)
(SL)
SS Heat
0.6
o
F
0.8
o
F
1.2
o
F
SS Cool
1.2
o
F
1.7
o
F
HP Heat & Cool
1.2
o
F
1.7
o
F
Enter Menu
SYSTEM
Press
and hold
for 3 seconds
Set at
Home