Westinghouse VK-40F580D - Manual (Page 36)

34
Editing the channel list
During the scanning process, the system will found and stored the channels automatically and show them in a
list.
1. When access TV sub-menu, press arrow keys
to select Master Channel List.
2. To select “Mark All”, “Unmark All”, “Analog
Only”, “Digital Only” or one specific channel,
press arrow keys on the remote control to
highlight your selected item. Press Enter button
on the remote control to confirm.
3. If the stored channels in the list are more than
one page, you can press arrow keys on the
remote control to go to next page.
 When you press CH Ÿ / ź buttons to change
channels, the channel which are not filed in
“Master Channel List” will be skipped.
Finding channel directly
1. When access TV sub-menu, press arrow keys
on the remote control to display Find Channel
screen.
2. Use 0-9 numeric keys on the remote control and
enter the channel numbers then press Enter to
start scanning certain channel on a particular
frequency.
 Once a PIN was set before, the system will
require a PIN No. to be entered before perform
“Find Channel” function. Please enter “0000” as
the default PIN setting.
Channel Name Editing
1. When access TV sub-menu, press arrow keys
on the remote control to display the channel list.
2. Press arrow keys on the remote control to
choose which channel you want to edit and
press Enter on the remote control to confirm.