Westinghouse VK-40F580D - Manual (Page 35)

33
English
Ϫ Audio Only
Turn off the LCD backlight and allow the current input’s audio to remain “on” for listening.
1. When access AV sub-menu, press arrow keys to
select Audio Only.
2. Press arrow keys and Enter button on the
remote to select ON or OFF.
Reset Picture and Audio settings
1. When access AV sub-menu, press arrow keys to
select Reset.
2. Press arrow keys and Enter button on the
remote to reset the settings.
Channel Management
Channel Scan
Once “Channel Scan” is not completed at the stage of “Initial Setup” (see page 22), please ensure to follow
the below procedures to reach a completion.
1. When access TV sub-menu, press arrow keys
and Enter button on the remote control to select
Scan Channels.
2. Press arrow keys and Enter button on the
remote control to select Antenna or Cable scan
and start to scan channels.
3. Once scan process is completed, all scanned
channels will be stored automatically in the
system then TV displays the last channel now be
found.
4. Press Enter button on the remote control to
finish.
 Once a PIN was set before, the system will require
a PIN No. to be entered before perform “Channel
Scans” function. Please enter “0000” as the default
PIN setting.