Wayne-Dalton Z-WAVE HA14WD - Manual (Page 3)

3
• ELECTRICAL SHOCK HAZARD. RISK OF INJURY OR DEATH. DISCONNECT
eLeCtrICAL poWer At SerVICe pAneL BeFore InStALLInG AnD teSt tHAt
poWer IS oFF BeFore WIrInG.
• FOLLOW LOCAL ELECTRICAL CODES DURING INSTALLATION.
• FOR INDOOR USE ONLY.
Installation
2 Switch/3-Way Application with Single-Pole Remote Switch
HOT BLACK BLUE
HA14WD
Incandescent
Lighting Load
BARE
COPPER
NEUTRAL
120VAC
50/60 Hz RED
LOAD
Single-
Pole
Switch
2 Switch/3-Way Application with 3-Way Remote Switch
Incandescent
Lighting Load
LOAD
HA14WD
HA14WD
HOT BLACK BLUE
BARE
COPPER RED
NEUTRAL
120VAC
50/60 Hz
3-Way
Switch
Not
Used
Common
18 ga. MIN. (not supplied)
Additional wire (not supplied) 3 Switch Application
Incandescent
Lighting Load
LOAD
3-Way
Switch 3-Way
Switch
HOT BLACK BLUE
BARE
COPPER RED
NEUTRAL
120VAC
50/60 Hz
Common Common
Additional wire (not supplied)
4 Switch Application
Incandescent
Lighting Load
4-Way
Switch 3-Way
Switch 3-Way
Switch
Common
HA14WD
HOT BLACK BLUE
BARE
COPPER RED
NEUTRAL
120VAC
50/60 Hz
Common
3-Way
Switch 3-Way
Switch 4-Way
Switch 4-Way
Switch
Additional wire (not supplied)
Incandescent
Lighting Load
Common
HA14WD
BLACK BLUE
BARE
COPPER RED
NEUTRAL
120VAC
50/60 Hz
Common
HOT
Multi-Way Application
HOT BLACK BLUE
HA14WD
Incandescent
Lighting Load
BARE
COPPER
NEUTRAL
120VAC
50/60 Hz
Single Pole Application
RED
LOAD
WARNING
InStALLAtIon
1.
2: Match your wiring application to the one of the diagrams below and refer to it for the remainder of the
installation.