Weider WESY93190 - Manual (Page 14)

31. Locate the Press Cable (88)Ñthis is the longest
Cable. Attach the end of the Press Cable (88) to the
Large ÒUÓ Bracket (84) with a 1/4Ó Nylon Locknut (44)
and a 1/4Ó Washer (37). Do not completely tighten
the Nylon Locknut. It should be threaded onto the
end of the Cable so only a couple of threads are
showing above the Nylon Locknut, as shown in
the inset drawing.
32. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the indicated bracket on the
Press Base (13) with a 3/8Ó x 2 1/4Ó Bolt (99), a 3/8Ó
Washer (38) and a 3/8Ó Nylon Locknut (42). Orient
the wide tab on the Pulley Covers as shown.
33. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the other bracket on the Press
Base (13) with a 3/8Ó x 2 1/4Ó Bolt (99), a 3/8Ó Washer
(38) and a 3/8Ó Nylon Locknut (42). Orient the wide
tab on the Pulley Covers as shown.
14
31
32
33
88
37
84
44
88
99
13
99
82
94
38 42
13
94
88
44
37
84
88
94
Wide Tab
82
94
42
38
Wide Tab