Wolf CTEWH45 - Manual (Page 9)

Cooktop Low-Profile Hood Care 9
wolfappliance.com
Halogen Lighting
Wolf cooktop low-profile hoods have halogen lighting with
three settings. Halogen bulbs are included with the hood.
LIGHT BULB REPLACEMENT
For replacement, cooktop low-profile hoods require type
T4, 12 V, 20 W halogen bulbs available at hardware stores
or through your authorized Wolf dealer. For local dealer
information, visit the find a showroom section of our
website, wolfappliance.com.
IMPORTANT NOTE: Use a paper towel when handling the
replacement halogen bulb to keep oil on fingers from
touching the bulb. Failure to do this will shorten the life of
the bulb.
1) Turn off the blower and lights and allow the halogen
bulb to cool before replacing.
2) Open the light cover by pressing in on the slots as
shown in the illustration below. Remove the old
halogen bulb by pulling it straight out of the socket.
3) Using a paper towel to handle the new halogen bulb,
insert the bulb into the socket. Place the light cover
back onto the light assembly.
HALOGEN
LIGHTING
LIGHT
COVER
Light bulb replacement.
Use caution when handling light bulbs. Halogen bulbs
get hot instantly and adjacent parts may retain heat.