Wolf CTEWH45 User Manual
Page 13
Troubleshooting Guide
13
wolfappliance.com
Troubleshooting
If your Wolf ventilation hood is not operating properly, use
the following troubleshooting guide before calling your
Wolf authorized service center. This guide will save you
time and trouble and may help you avoid the expense of a
service call.
Ventilation hood does not operate.
•
Check the household fuse or circuit breaker to see if it
has been blown or tripped. A power outage may also
have caused a disruption in service.
•
No electricity is being supplied to the ventilation hood.
Have an electrician verify that the hood is connected to
a proper electrical circuit.
Blower runs but lights do not operate.
•
Check the light bulbs to see if they have burned out.
DISCONNECTING
SWITCH
Location of disconnecting
switch.
DISCONNECTING SWITCH
IMPORTANT NOTE:
To reduce the risk of injury, disconnect
the power supply before servicing. This hood is equipped
with an integral disconnecting switch located inside the
blower housing. Refer to the illustration below.