Western Digital WDE2170 - Manual (Page 38)

The Option Block WD Enterprise WDE2170/WDE4360
RELEASED 04-08-97 4079-001045 Rev. B 30
5.4. SCSI ID Jumper Table
Table 5-2. SCSI ID Jumper Table
JUMPER LOCATION
SCSI ID Pins 7 & 8 Pins 5 & 6 Pins 3 & 4 Pins 1 & 2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
* If any device on your computer’s SCSI bus supports only 8-bit SCSI IDs, the WD Enterprise drive must be set to
one of these values. When setting IDs on 50-pin drives, pins 7 and 8 are not used.
jumper installed jumper removed legal 8-bit bus IDs*