weber Grill - Manual (Page 10)

10
The following items will be found in the hardware
pack.
Sixteen nylon washers
(actual size)
Four aluminum washers
(actual size)
Eight 1/4-20 x 1 3/4 inch bolts
(actual size)
Four 1/4-20 acorn nuts
(actual size)
Four 1/4-20 x 1/2 inch bolts
(actual size)
Two #8-18 x 5/8 Phillips head screws
(actual size)
Three tool holders
CharBin lid handle
Three hubcaps
Figure 1
Step 1
Assemble wheels
You will need: axle, two wheel hubcaps, two wheels,
wheel frame, hammer and a block of wood.
Place one end of the axle on the block of wood (or other
protected surface). Tap on one hubcap.
Put one wheel on the axle, WEBER side toward the
hubcap. Slide the axle through the frame. Add the other
wheel, WEBER side out. Tap on the hubcap. Figure 1.
W EB
E R W EB
E R