Wasp Bar Code WDT3200 - Manual (Page 27)

WDT 3200 Product Reference Guide
27
Chapter 5. Useful Utilities
Introduction
This chapter discusses software applications you can use to make your
experience with the WDT3200 more productive.
Scanner Setting
When it is necessary for you to change the default barcode symbologies for a
different application, Scanner Control Panel allows you to change default
symbologies, place delimiter characters behind scanned data, and save the
settings. Run this program from \Start\Setting\Control Panel\Scanner
Setting.exe. An example of the Scanner Control Panel/Settings tab is shown
below:
Scan2Key
This program is enabled by default.
The Scan2Key application can route input from the scanner port to the keyboard
buffer, with the result that all scanned data will be treated as if it were input from
the keypad. With this router, scanned data can be directly input into generic
applications like MS Pocket Word.