White Rodgers 90 - Manual (Page 6)

4
The configuration menus allow you to
set certain thermostat operating
characteristics to your system or
personal requirements.
To enter the User Configuration menu,
press PROGRAM
RUN to make sure
the thermostat is in the run program
mode, then press TIME
FWD and
TIME BACK at the same time. The
display will show the first item in the
configuration menu.
The following charts (pages 5 & 6)
describe each item on the menus. Press
TIME
FWD to move forward to the
next item in the menu or TIME BACK
to move backward to the previous
item. Set these according to your
personal preference using
or
. To enter the Keypad Lock
menu, while in the User Menu, press
and hold TIME
FWD and TIME
BACK for at least two seconds.
To exit either menu and return to
normal operation, press PROGRAM
RUN . To re-enter to the User menu at
any time press PROGRAM RUN ,
then press TIME FWD and TIME
BACK at the same time. While in the
menus, if you do not press any buttons
for two minutes, the thermostat will
revert to normal operation.
CONFIGURATION