Wilton PF3-EZ - Manual (Page 6)

6
Introduction
This manual is provided by WMH Tool Group, Inc. covering the safe operation and maintenance
procedures for a Model PF3-EZ Stock Feeder. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Description
The PF3-EZ Stock Feeder can be mounted to a table saw to safely and effectively feed workpieces into
the blade. The Stock Feeder has a continuous duty motor and lubricated gearbox that transmit power
through roller chain and sprockets to the feed rollers, providing superior positive feeding for all types of
materials. Heavy-duty locking mechanisms secure the feeder in position. The roller system is
“maintenance-friendly” allowing you to replace a single roller if necessary, instead of a complete set.
Specifications
Model number ...............................................................................................................................PF3-EZ
Stock number (230V)................................................................................................................. 1790814K
Stock number (460V)................................................................................................................. 1790815K
Motor............................................................................................................................ TEFC, 3/4HP, 3Ph
Height with handle (in.) ....................................................................................................................... 31.5
Width (in.)......................................................................................................................................... 21.85
Length with handle and arm fully extended (in.) .................................................................................. 51.5
Elevating Column diameter (in.)............................................................................................................... 2
Horizontal Arm diameter (in.) ................................................................................................................ 2.3
Rollers (dia. x w) (in.)..............................................................................................4-3/4 x 1, polyurethane
Rotation............................................................................................................................. forward/reverse
Number of speeds .........................................................................................................................variable
Range of speeds (FPM)............................................................................................................... 6.5 to 66
Distance between rollers, center-to-center (in.) ........................................................................5.93 to 5.31
Swing (deg.) ........................................................................................................................................ 360
Vertical movement (in.)....................................................................................................................... 8.33
Horizontal movement (in.)................................................................................................................. 29.33
Maximum height of rollers parallel to table top (in.).............................................................................. 7.47
Approximate shipping weight (lbs.) ...................................................................................................... 180
Approximate net weight (lbs.)............................................................................................................... 170
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.