beautypg.com

End of cycle signal, Loading, Selecting the right cycle and setting – Whirlpool 3977631 User Manual

Page 15

background image

Drying tips

Always follow care label directions when

they are available.

Always use fabric softener sheets labeled

as dryer safe and follow package
instructions carefully.

Remove the load from the dryer as soon

as tumbling stops to reduce wrinkling.
This is especially important for permanent
press, knits, and synthetic fabrics.

15

USING YOUR DRYER

Selecting the right cycle and setting

The following pages describe the cycles on
your dryer. Refer to the chart on page 17 for
help in selecting drying cycles.

Cycle and temperature tips

Make sure you have selected the

correct cycle and temperature for your
load.

Use the Air cycle, or line dry rubber,

plastic, delicate, and heat-sensitive fabrics

The last few minutes of all cycles are

without heat to make the load cooler to
handle.

Loading

Loading suggestions

This table shows the maximum load you
can place in your compact dryer. Expect
longer drying times.

COMPACT DRYERS

Permanent Press
6 shirts
– or –
2 double sheets
2 pillowcases
– or –
2 single sheets
2 pillowcases

Knits
2 slacks
2 shirts
– or –
3 dresses

Delicates
1 camisole
2 slips
2 panties
2 bras
1 nightie
1 half slip

Mixed Load
1 pair slacks
2 pillowcases
2 shirts
1 T-shirt

Heavy Work Clothes
3 work shirts
2 pair pants

Towels
9 bath towels
– or –
6 bath towels
3 hand towels
6 wash cloths

End of cycle signal

The dryer sounds a signal to let you know
when the cycle is finished. The signal is not
adjustable and cannot be turned off.

The signal is helpful when you are drying
permanent press, synthetics, and other
items that should be taken out as soon as
the dryer stops.

3977631 v12 c51 3/22/99 5:11 PM Page 15