Whirlpool 3363573 - Manual (Page 7)

7
Temperature
Cold
Cold Hot
Cold
Wash
Rinse
Warm
Cold
4. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type
of fabric and soils being washed.
• See page 15 for water temperature
guidelines.
• Depending on your model, your
washer’s Water Temperature Selector
has either three or four settings (see
illustrations).
• The top temperature is the wash water
and the bottom temperature is the
rinse water.
5. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See pages 8 and 9.
6. Pull out Cycle Control Knob to start
the washer.
7. (OPTIONAL STEP) If desired, add mea-
sured liquid chlorine bleach after the
washer starts agitating. See page 11.
8. (OPTIONAL STEP) If desired, add mea-
sured and diluted liquid fabric softener
to the final rinse cycle. See page 11.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if open)
and pull out the Cycle Control Knob.
OR
Temperature
Hot
Cold
Cold
Cold
Wash
Rinse
Warm
Warm
Warm
Cold
O P E R A T I N G Y O U R W A S H E R