Whirlpool 3363573 - Manual (Page 10)

10
Fill
▼
Rinse
▼
Drain-No agitation
▼
Spin-Spray rinse
▼
Spin
▼
Off
Fill
▼
Wash selected time
▼
Drain*
No agitation
▼
Spin
▼
Understanding what happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation occurs with
the washer lid up or down.
During agitation, the agitator creates a
continuous rollover action
that provides a thorough
cleaning of the wash load.
After agitation starts, the Cycle Control Knob
turns clockwise until it points to an OFF area
and the cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
* The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
WASH RINSE
O P E R A T I N G Y O U R W A S H E R