Walker MC (20 HP) - Manual (Page 8)

6
ITEM PART DEScRIPTION NO.
NO. NO. REQ’D
ITEM PART DEScRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker ® replacement parts. Effective Date 06-15-10
BODY ASSEMBLY (GHS 6.7 BUSHEL MODELS)
Body Assembly (GHS 6.7 Bushel Models Only)*
1 5566 Tilt Stop Strap 1
2 5516-8 6.7 Rear Bumper, GHS 1
3 7516-5 Catcher Pivot Bushing 2
4 5162 Roller Wheel (5" Rubber) 2
5 7517-2 Catcher Pivot Plate 2
6 6100-17 Bumper Riser Bar 2
Fasteners
F002 10-24 Keps Nut 2
F009 5/16-18 Whiz Locknut 4
F012 3/8-16 Keps Nut 2
F013 3/8-16 Whiz Locknut 2
F014 3/8-16 ESNA Nut 2
F026 10-24 x 1/2 PPHMS 1
F027 10-24 x 5/8 PPHMS 1
F042 3/8-16 x 2-1/4 Hex Bolt 2
F059 3/8 Wave Spring Washer 2
F085 3/16 Rivet Backup Washer 1
F087 #10 x 7/8 Fender Washer 2
F093 5/16-18 x 1 Hex Bolt 4
F151 3/8-16 x 7/8 Hex Bolt 2
F241 .375 x .875 x .10 Washer 4
* Rear Bumper Assembly for GHS 10.0 Bushel Models is not
shown here. Refer to BODY / cHASSIS ASSEMBLY (GHS
MODELS), Page 4. Rear Bumper Assembly for SD Models is
not shown here. Refer to BODY ASSEMBLY (SD MODELS),
Page 8.
NOTE: Refer to BODY / cHASSIS ASSEMBLY (GHS MODELS),
Page 4 for all common parts used on both GHS and SD
models.