Western Digital My Passport Elite - Manual (Page 5)

MY PASSPORT ELITE PORTABLE HARD DRIVE
USER MANUAL
ABOUT YOUR WD DRIVE – 3
About Your WD Drive
Features
LED Indicators
The power/activity and capacity gauge indicators are represented by four LEDs
underneath the sliding USB port cover as shown above. Only one LED illuminates at
a time corresponding to drive capacity used.
Power/Activity LED Behavior
Capacity Gauge
The capacity gauge is enabled only through installation of its driver and WD Drive
Manager, which must be installed on each system to which My Passport
™ is
connected. The capacity gauge is updated automatically upon drive usage.
The capacity gauge consists of four sections which illuminate left to right to indicate
space used on the drive during power-on state. Each section represents
approximately 25 percent of drive capacity. Because this drive is preformatted and
contains software and utilities, the first section is illuminated upon installation.
Appearance Drive State
Steady Power-on state or power-save mode
Slow flashing System standby
Alternating left to right then right to left Drive in use
2
Cover slides to the left USB 2.0 LEDs
Storage Used
0-24 percent 25-49 percent 50-74 percent 75-100 percent